Flowmeter Products

Low-flow mini Flowmeters FCH-m-Series

Fuel  flow meter

Flow range 0,07 up 7,0 LPM





















Low flow Flowmeters


Turbine flowmeter


Turbine Flow meter

Water flow meter

Water flowmeter

Water flow meters

Fuel flowmeters

Fuel flowmeter

Fuel flow meter

Fuel flow meters

Diesel fuel flowmeters

Fuel Flow sensor

Diesel Flow meter


oil Flow sensor

Diesel oil Flow meter


Oil flow meter

Oil flowmeter


Low-flow Flowmeters, FCH-mini-POM, Q= 0,005 - 8 LPM

The mini low-flow Flowmeters of the FCH-m-POM series are especially suitable for measuring low viscous liquids starting from 0.005 l /min like: gasoline, diesel, water,   cooling water, beverages, juices or other non aggressive liquid media.

Flowmeter FCH-m-POM AD= 6 mm  

Depending on the size of the nozzle, D= 0.2 mm – 4.5mm max., our mini flow meters  can be retooled for lower rates of flow Q= 0.005 -  8,0 LPM (Litre/minute)


Process connector (also combined)

  • Tube connector               2 x D= 6 mm
  • Straight tube connector   2 x D= 6 x 20 mm
  • Male thread BSP              2 x G 1/8"
  • Female thread                 2 x M5

Electrical connection

  • Connector-LC IP 00
  • Connector IP 65
  • Round or flat ribbon cable
  • Silicon / Teflon cabele

Signal Output

  • NPN open-collector / PNP
  • Temperature Senor PT 100 / PT 1000
  • Inductive Sensor PNP
  • LED integrated (optional)


  • Mounting plate from stainless steel or aluminum
  • Flow monitor, totaliser ARS 260
  • Currently consumption indicator

  • Differential analysing unit ARS 261 for differential measuring

Other special versions of flowmeters and special materials available on request.

Characteristics of POM (Polyoxymethene)

Excellent resistance to fuels: diesel, fuel oil, kerosene, gasoline as well as lubricant, solvents and many other neutral media. Broad field of operation and temperature range, down to very low temperatures. 


  • High tensile strength, impact strength and stiffness
  • Fatigue strength unequalled by other plastics
  • Excellent stability
  • Excellent isolating qualities, creep resistance
  • Low friction

It is recomended not to use POM in strong acid or basic solutions outside an area of less than 4pH and more than 9pH.